Installation Method

REEL TECH is the world's best company in lighting lifter industry.
  • INSTALLATION METHOD
  • Cable Connection Method
Standard Installation
1. Combine lifter with a hook.
1. Combine lifter with a hook.
2. Connect the main power to the lifter.
2. Connect the main power to the lifter.
3. Attach light fixture to the lifter using the shackle provided.
3. Attach light fixture to the lifter using the shackle provided.
4.Press DOWN button to descent.
4.Press DOWN button to descent.
5. Combine lifter with lighting fixture by a shackle, and connect the power.
5. Combine lifter with lighting fixture by a shackle, and connect the power.
H-Beam Mounting kit
1. Combine a holding bracket with clamp at one side first.
1. Combine a holding bracket with clamp at one side first.
2. Put clamp into H-fitting as per below figure.
2. Put clamp into H-fitting as per below figure.
3. Combine other side holding bracket with clamp & H-fitting.
3. Combine other side holding bracket with clamp & H-fitting.
4. Combine lifter with H-fitting by the shackle and connect main power to the lifter.
4. Combine lifter with H-fitting by the shackle and connect main power to the lifter.
5. Combine lifter with lighting fixture by a shackle, and connect the power.
5. Combine lifter with lighting fixture by a shackle, and connect the power.
Pipe Mounting Kit
1. Hang U-bolt over the pipe as per below figure. and Combine U-bolt with clamp as per below figure.
1. Hang U-bolt over the pipe as per below figure. and Combine U-bolt with clamp as per below figure.
 2. Tighten nuts.
2. Tighten nuts.
3. Combine clamp with lifter by a shackle.
3. Combine clamp with lifter by a shackle.
4. Connect main power to the lifter
4. Connect main power to the lifter
5. Mount lifter with light fixture by the shackle, and connect power wire.
5. Mount lifter with light fixture by the shackle, and connect power wire.
Flat angle Mounting Kit
1. Put anchor bolts into holes of Holder and screw them to fix.
1. Put anchor bolts into holes of Holder and screw them to fix.
2. Connect main power.
2. Connect main power.
3. Mount lifter with light fixture by the shackle, and connect power wire.
3. Mount lifter with light fixture by the shackle, and connect power wire.
Recess Mounting Kit
1. Drive a stud on the ceiling.
1. Drive a stud on the ceiling.
2. Fasten stud to the flat angle braket.
2. Fasten stud to the flat angle braket.
3. Connect the wires.
3. Connect the wires.
4. Recess mounting plae.
4. Recess mounting plae.
5. By using shackle to connect lifter and fixture before connecting electricity wire.
5. By using shackle to connect lifter and fixture before connecting electricity wire.
Control panel system
Control panel system
Cable Connection Method